Characteristics: The conveyor belt is featured with high tensile strength, good impact resistance, long service life, low elongation, good trough ability and desired flexing resistance. It is suitable for material conveying with long distance, high haul and high speed, and composed of core rubber, steel wire rope, coating and edge rubber.
Application: Widely used for material conveying in coal, mine, harbors, metallurgy, electric power and chemical industry.
Type: According the performance of covering glue, can be classified as common belt, Flame retardant, cold resistant, wear-resisting, Heat resistant, acid/alkaline resistance and so on.
According the inner structure, can be classified as general application ST belt, transverse reinforced type and tear resistant with detector loop.
The common structure type
It uses the new type structural steel cable as the tension element, features largely in the high tension strength, small elongation, excellent trough ability and high flexibility, and is applicable for the conveyance of materials with long distance, heavy load and high speed.
The core rubber has enough diffusion space for each wire in stand, the bonding strength of the rubber and steel cable is very high, it is rust and corrosion resistance, it relieves the mutual shearing and torsion of the wires in stands, it has high dynamic fatigue resistance, and the product has a long service life
Tear resistance(transverse reinforced) type
Structure: It uses the new type steel cable as the tension element. On one side or two sides vertical that is perpendicular to the lengthways steel cable, evenly lay the reinforcing layer of the steel cable, steel cord, fabric, etc. broadways.
Character :It has excellent impact resistance and tearing resistance performance.
Embedded coil tear-resistant conveyor belt
Adopt the new structure as the tension element between the core rubber of steel cord conveyor belt and cover rubber, and the sensors are embedded in certain longitudinally interval.
1.Micro-computer controlled, when tearing in belt is detected and the an alarm is sent out and give the instruction to stop running automatically.
2.When the running speed of conveyor belt is unusual or reduced to the set speed of stopping the belt, an alarm signal is sent out and the conveyor belt will stop run automatically.
3.It has memory function and displays the belt running data and condition.
Main technical parameters of the steel cord flame-resistant conveyor belt produced for coal mines in accordance with MT668-2008
The Recommended Minimum Conveyor Rollers' diameter
ST Series
Belt Model ST |
ST |
ST |
ST |
ST |
ST |
ST |
ST |
ST |
ST |
ST |
ST |
ST |
ST |
ST |
630 |
800 |
1000 |
1250 |
1600 |
2000 |
2500 |
2800 |
3150 |
3500 |
4000 |
4500 |
5000 |
5400 |
Diameter of Minimum roller(mm) |
500 |
500 |
630 |
800 |
1000 |
1000 |
1250 |
1250 |
1400 |
1600 |
1600 |
1600 |
1800 |
1800 |